Brick Matching & Masonry Contractor in Waukesha, WI

Brick Matching, Stone Veneer & Masonry Repair in Waukesha

Brick matching: we identify what is on your wall, its exposed size, color range, texture and hardness, and source replacement units to match, cutting larger brick down or ordering a custom size when nothing standard fits. We are a masonry contractor, not a brick yard, so we do not sell brick over the counter; we find the right brick for your repair and lay it. Stone veneer: we repoint and repair natural stone, including Lannon stone, and rebuild failed veneer properly, the way we took one front elevation down to sound sheathing and rebuilt it in this natural stone veneer facade. Tuckpointing: we repoint with mortar matched in color, texture and joint profile and kept softer than the brick, which is the heart of our tuckpointing work in the Milwaukee area. We also handle chimney repair and rebuilds, lintels and foundation masonry, for homes and commercial buildings.

What Waukesha Is Built Of, and How We Match It

Waukesha’s masonry comes in layers. The oldest downtown blocks were built of native limestone, starting with the Robinson Block in 1857, and the county courthouse is faced in rock-faced local limestone. Cream brick buildings followed in the 1870s and 1880s; the 1881 railroad depot sits on a limestone base with cream brick above. The revival houses of the 1920s and 1930s in neighborhoods like Caples’ Park are clad in cream or red brick and Lannon stone. After the war the city nearly doubled in population, and Cape Cods with stone veneer and ranches in Roman brick filled in around it. Matching any of these is a process, not a guess. We match the exposed size first, then build a sample panel across the wall’s full color range beside cleaned original brick, because a small change in mortar color can make a good brick match look wrong. Older brick is generally softer than modern brick, so on larger repairs we match hardness as well as color, and the mortar always stays softer than the brick. That matters here: Waukesha averages about 143 nights a year at or below freezing, around 20 more than Milwaukee’s airport, and hard mortar on soft brick cracks and spalls the face within a few winters. See how we approach it in our historic mortar and stone matching work.

Serving Waukesha as Part of the Milwaukee Area

North Shore Masonry serves Waukesha from our Milwaukee operation, with the same crews working in Brookfield, Elm Grove, Wauwatosa and West Allis. Start at our Milwaukee masonry services hub for every service and town we cover.

Talk to a Masonry Contractor About Your Waukesha Brick or Stone

If you need a brick or stone repair that blends in, whether it is a patch on a cream brick wall, a failed section of stone veneer or a chimney, call us at +1 414-404-9029 or request a free on-site estimate. If your property is a landmark or sits in one of Waukesha’s historic districts, we will put together the written estimate, photos and material samples the Landmarks Commission asks for with a Certificate of Appropriateness application.

Brick Matching and Masonry FAQs for Waukesha, WI

Can you match the brick on my older Waukesha home?

Usually, yes. We match the exposed size first, then the color range, texture and, on larger repairs, hardness, because older brick is generally softer than modern brick. We prove the match with a sample panel next to cleaned original brick before the repair goes in. When no standard brick fits, larger units can be cut down or a custom size ordered, and we match the mortar too, because a small change in mortar color can make a good brick match look wrong.

Do you sell brick or stone?

No. We are a masonry contractor, not a brick yard or stone supplier. What we do is identify the brick or stone on your building, source matching units for the repair, and install them so the repair blends in. If you only need to buy brick for your own project, a brick yard is the right place to start.

Do I need approval for masonry work in a Waukesha historic district?

If your property is a local landmark or sits in one of Waukesha’s nine historic districts, exterior alterations need a Certificate of Appropriateness from the Landmarks Commission, and the City will not issue a building permit without one. The City lists chimney repair and foundation repair among the work that needs approval, and its design policies recommend mortar and replacement brick matched to the original. The landmarks program also offers paint and repair grants of up to $3,000, depending on project size.

Can you repair Lannon stone or stone veneer?

Yes. Lannon stone is a buff dolomite, often called limestone, named for the village of Lannon in Waukesha County, and by the middle of the twentieth century it was mostly used as a veneer. Natural stone like it can be repointed and individual stones reset or replaced. Manufactured stone veneer is different: it relies on a water-resistive barrier, lath, a scratch coat and a weep screed behind it, and where those were skipped the lasting fix is usually to take the failed section down and rebuild it properly rather than patch the face.

Do I need a permit for tuckpointing in Waukesha?

It depends on the work and the property, so we confirm with the City of Waukesha’s Building Inspection department before we start rather than guess. Foundation repairs need a permit, and any landmark or historic district property needs its Certificate of Appropriateness first.